The protective net to prevent parabolic objects on the bridge is called bridge anti-throwing net. Because it is often used on viaducts, it is also called viaduct anti-throwing net. Its main function is to install it on municipal viaducts, highway overpasses, railway overpasses, overpasses, etc., to prevent parabolic injuries. This method can ensure that pedestrians and vehicles passing under the bridge will not be injured. In such a Under such circumstances, the application of bridge anti-throwing nets is also increasing.
Because its function is protection, the anti-throwing net of the bridge is required to have high strength, strong anti-corrosion and anti-rust capabilities. Usually, the height of the anti-throwing net of the bridge is between 1.2-2.5 meters, with rich colors and beautiful appearance. Beautify the urban environment.
The bridge anti-throwing mesh uses high-quality steel plates and angle steels as raw materials. It is a welded mesh protected by three layers of galvanizing, pre-coating primer and high-adhesion powder spraying. It has the characteristics of anti-corrosion and anti-ultraviolet for a long time.
The surface treatment of the anti-throwing net is galvanized and spray-coated, or one of them can be selected, and the top end is covered with a plastic cover or a rainproof cap.
Depending on the environment and installation methods, methods such as embedding 50cm in advance and adding a base can be used. The bridge anti-throwing mesh and the column are connected by screws and various special plastic or iron clips.
The bridge anti-throwing net has a wide range of uses and can be used as a highway isolation fence. It mainly uses high-quality wire rod as the material, and the mesh surface is galvanized and pvc-coated, which has the characteristics of anti-corrosion and anti-ultraviolet for a long time.
| Produktnavn | Expanded metal mesh fence panels |
| Materiale | Galvanized, stainless steel, low carbon steel, aluminum or customized |
| Overfladebehandling | Hot-dipped galvanized and electric galvanized, or others. |
| Hole Patterns | Diamond, hexagon, sector, scale or others. |
| Hole Size(mm) | 3X4, 4×6, 6X12, 5×10, 8×16, 7×12, 10X17, 10×20, 15×30, 17×35 or customized |
| Tykkelse | 0.2-1.6 mm or customized |
| Roll / Sheet Height | 250, 450, 600, 730, 100 mm or customized by clients |
| Roll / Sheet Length | Customized. |
| Applications | Curtain wall, precision filter mesh, chemical network, indoor furniture design, barbecue mesh, aluminum doors, aluminum door and window mesh, and applications such as outdoor guardrails, steps. |
| Pakningsmetoder | 1. I træ-/stålpaller 2. Andre specialmetoder efter kundens krav |
| Production Period | 15 days for 1X20ft container, 20days for 1X40HQ container. |
| Quality Control | ISO Certification; SGS Certification |
| Eftersalgsservice | Produkttestrapport, online opfølgning. |
Expanded metal fence is economical, cost-effective, good strength and long service time, so it is widely used in highway anti-glare net, urban roads, military camps, national defense borders, parks, mansions and villas, residential quarters, stadiums, airports, road greening Belts etc. as isolation fences, guardrails, etc.
The plastic-coated thickness of the bridge anti-throwing net can reach more than 1.0mm. The mesh surface has strong impact resistance. There are generally two types of mesh edges: crooked and twisted. Used for roads, railways, expressways, etc., it can be made into a network wall or used as a temporary isolation network, and it can be realized only by using different column fixing methods.
Vores priser kan ændres afhængigt af udbud og andre markedsfaktorer. Vi sender dig en opdateret prisliste, når din virksomhed har kontaktet os for yderligere information.
Ja, vi kræver, at alle internationale ordrer har en løbende minimumsbestillingsmængde. Hvis du ønsker at videresælge, men i meget mindre mængder, anbefaler vi, at du tjekker vores hjemmeside.
Ja, vi kan levere det meste dokumentation, herunder analyse-/overensstemmelsescertifikater, forsikring, oprindelsescertifikater og andre eksportdokumenter, hvor det er nødvendigt.
For prøver er leveringstiden cirka 7 dage. For masseproduktion er leveringstiden 20-30 dage efter modtagelse af depositum. Leveringstiderne træder i kraft, når (1) vi har modtaget din depositum, og (2) vi har din endelige godkendelse af dine produkter. Hvis vores leveringstider ikke passer til din deadline, bedes du gennemgå dine krav i forbindelse med dit salg. Vi vil i alle tilfælde forsøge at imødekomme dine behov. I de fleste tilfælde er vi i stand til at gøre det.
Du kan betale til vores bankkonto, Western Union eller PayPal:
30% depositum på forhånd, 70% saldo mod kopi af B/L.
Vi garanterer vores materialer og udførelse. Vores forpligtelse er din tilfredshed med vores produkter. Uanset om det er garanti eller ej, er det vores virksomhedskultur at håndtere og løse alle kundeproblemer for alle.’tilfredshed
Ja, vi bruger altid eksportemballage af høj kvalitet. Vi bruger også specialiseret fareemballage til farligt gods og validerede køleopbevaringsfirmaer til temperaturfølsomme varer. Specialiseret emballage og ikke-standardiserede emballagekrav kan medføre et ekstra gebyr.
Forsendelsesomkostningerne afhænger af den måde, du vælger at modtage varerne på. Ekspres er normalt den hurtigste, men også den dyreste måde. Søfragt er den bedste løsning til store mængder. Vi kan kun give dig de præcise fragtpriser, hvis vi kender detaljerne om mængde, vægt og leveringsmåde. Kontakt os venligst for yderligere information.
expanded fence
expanded grating
expanded wire mesh
Fuld kontrol over produktet gør det muligt for os at sikre, at kunderne modtager priser og service af højeste kvalitet. Vi er stolte af alt, hvad vi gør for at betjene vores kunder.
