High-Quality Galvanized Durable and Sturdy Building Reinforcement Mesh

High-Quality Galvanized Durable and Sturdy Building Reinforcement Mesh

Reinforcing mesh, also called welded steel mesh, steel welded mesh, steel mesh and so on. It is a mesh in which longitudinal steel bars and transverse steel bars are arranged at a certain interval and are at right angles to each other, and all intersections are welded together.

High-Quality Galvanized Durable and Sturdy Building Reinforcement Mesh
Funktsioon
 

1. Special, good earthquake resistance and crack resistance. The mesh structure formed by the longitudinal bars and transverse bars of the reinforcing mesh is firmly welded. The bonding and anchoring with the concrete is good, and the force is evenly transmitted and distributed.
2. The use of reinforcing mesh in construction can save the number of steel bars. According to actual engineering experience, the use of reinforcing mesh can save 30% of the steel bar consumption, and the mesh is uniform, the wire diameter is accurate, and the mesh is flat. After the reinforcing mesh arrives at the construction site, it can be used directly without processing or loss.
3. The use of reinforcing mesh can greatly speed up the construction progress and shorten the construction period. After the reinforcing mesh is laid according to the requirements, the concrete can be poured directly, eliminating the need for on-site cutting, placing, and binding one by one, which helps to save 50%-70% of the time.

reinforcing mesh (15)
sd
reinforcing mesh (16)
asd
Taotlus
 
1. Application of reinforcing mesh in highway cement concrete pavement engineering

The minimum diameter and maximum spacing of reinforcing mesh for reinforced concrete pavement shall comply with current industry standards. When cold-rolled ribbed steel bars are used, the steel bar diameter shall not be less than 8mm, the longitudinal steel bar spacing shall not be greater than 200mm, and the transverse steel bar spacing shall not be greater than 300mm. The vertical and horizontal steel bars of the welded mesh should have the same diameter, and the thickness of the protective layer of the steel bars should not be less than 50mm. The welded mesh for reinforced concrete pavement reinforcement can be implemented in accordance with the relevant regulations for welded mesh for reinforced concrete pavement.

2. Application of reinforcing mesh in bridge engineering

Mainly used in bridge deck pavement of municipal bridges and highway bridges, renovation of old bridge decks, anti-cracking of bridge piers, etc. The quality acceptance of thousands of bridge applications in China shows that the use of welded mesh can significantly improve the quality of the pavement layer of the bridge deck, the pass rate of the thickness of the protective layer is over 97%, the flatness of the bridge deck is improved, the bridge deck is almost free of cracks, and the pavement speed is increased More than 50%, reducing the cost of bridge deck pavement by about 10%.

3. Application of reinforcing mesh in tunnel lining

According to national regulations, the ribbed reinforcing mesh should be installed in shotcrete, which is conducive to improving the shear and bending strength of shotcrete, improving the punching resistance and bending resistance of concrete, improving the integrity of shotcrete, and reducing the risk of shotcrete.

reinforcing mesh
KKK
 
Mis on teie hinnad?

Meie hinnad võivad muutuda sõltuvalt pakkumisest ja muudest turuteguritest. Saadame teile ajakohastatud hinnakirja pärast seda, kui teie ettevõte on meiega lisateabe saamiseks ühendust võtnud.

Kas teil on minimaalne tellimiskogus?

Jah, me nõuame, et kõigil rahvusvahelistel tellimustel oleks kehtiv minimaalne tellimiskogus. Kui soovite edasi müüa, aga palju väiksemates kogustes, soovitame teil vaadata meie veebisaiti.

Kas saate esitada asjakohased dokumendid?

Jah, me saame esitada enamiku dokumente, sh analüüsi-/vastavussertifikaadid, kindlustuse, päritolu ja muud ekspordidokumendid, kui see on vajalik.

Milline on keskmine tarneaeg?

Proovide puhul on tarneaeg umbes 7 päeva. Masstootmise puhul on tarneaeg 20–30 päeva pärast ettemaksu laekumist. Tarneajad hakkavad kehtima, kui (1) oleme teie ettemaksu kätte saanud ja (2) oleme teie toodetele lõpliku heakskiidu saanud. Kui meie tarneajad ei vasta teie tähtajale, arutage oma nõudeid müügiesindajaga üle. Püüame igal juhul teie vajadusi arvestada. Enamasti suudame seda teha.

Milliseid makseviise te aktsepteerite?

Makse saate teha meie pangakontole, Western Unioni või PayPali kaudu:

30% ettemaks, 70% saldo B/L koopia vastu.

Milline on toote garantii?

Garanteerime oma materjalide ja töötluse kvaliteeti. Meie eesmärk on tagada teie rahulolu meie toodetega. Garantii või mitte, aga meie ettevõtte kultuuriks on tegeleda kõigi klientide probleemidega ja lahendada need kõigile.rahulolu

Kas garanteerite toodete ohutu ja kindla kohaletoimetamise?

Jah, me kasutame alati kvaliteetset ekspordiks mõeldud pakendit. Samuti kasutame ohtlike kaupade jaoks spetsiaalset ohtlike ainete pakendit ja temperatuuritundlike esemete jaoks valideeritud külmhoiuteenuseid pakkuvaid pakendeid. Spetsiaalse pakendi ja mittestandardsete pakkimisnõuete eest võidakse küsida lisatasu.

Kuidas on lood saatmiskuludega?

Saatmiskulud sõltuvad kauba kättesaamise viisist. Ekspresspost on tavaliselt kiireim, aga ka kõige kallim viis. Meretransport on parim lahendus suurte koguste puhul. Täpsed veohinnad saame teile anda ainult siis, kui teame kogust, kaalu ja viisi. Lisateabe saamiseks võtke meiega ühendust.

 

galvanized reinforcing mesh

tsingitud terasest tara

steel wire mesh fence

küsi pakkumist

Täielik kontroll toote üle võimaldab meil tagada klientidele parima kvaliteediga hinnad ja teenused. Oleme uhked kõige üle, mida oma klientide teenindamiseks teeme.

steel fencing suppliers

Kui olete meie toodetest huvitatud, võite siia oma andmed jätta ja me võtame teiega peagi ühendust.