Reinforcing mesh, also called welded steel mesh, steel welded mesh, steel mesh and so on. It is a mesh in which longitudinal steel bars and transverse steel bars are arranged at a certain interval and are at right angles to each other, and all intersections are welded together.
1. Special, good earthquake resistance and crack resistance. The mesh structure formed by the longitudinal bars and transverse bars of the reinforcing mesh is firmly welded. The bonding and anchoring with the concrete is good, and the force is evenly transmitted and distributed.
2. The use of reinforcing mesh in construction can save the number of steel bars. According to actual engineering experience, the use of reinforcing mesh can save 30% of the steel bar consumption, and the mesh is uniform, the wire diameter is accurate, and the mesh is flat. After the reinforcing mesh arrives at the construction site, it can be used directly without processing or loss.
3. The use of reinforcing mesh can greatly speed up the construction progress and shorten the construction period. After the reinforcing mesh is laid according to the requirements, the concrete can be poured directly, eliminating the need for on-site cutting, placing, and binding one by one, which helps to save 50%-70% of the time.




The minimum diameter and maximum spacing of reinforcing mesh for reinforced concrete pavement shall comply with current industry standards. When cold-rolled ribbed steel bars are used, the steel bar diameter shall not be less than 8mm, the longitudinal steel bar spacing shall not be greater than 200mm, and the transverse steel bar spacing shall not be greater than 300mm. The vertical and horizontal steel bars of the welded mesh should have the same diameter, and the thickness of the protective layer of the steel bars should not be less than 50mm. The welded mesh for reinforced concrete pavement reinforcement can be implemented in accordance with the relevant regulations for welded mesh for reinforced concrete pavement.
Mainly used in bridge deck pavement of municipal bridges and highway bridges, renovation of old bridge decks, anti-cracking of bridge piers, etc. The quality acceptance of thousands of bridge applications in China shows that the use of welded mesh can significantly improve the quality of the pavement layer of the bridge deck, the pass rate of the thickness of the protective layer is over 97%, the flatness of the bridge deck is improved, the bridge deck is almost free of cracks, and the pavement speed is increased More than 50%, reducing the cost of bridge deck pavement by about 10%.
According to national regulations, the ribbed reinforcing mesh should be installed in shotcrete, which is conducive to improving the shear and bending strength of shotcrete, improving the punching resistance and bending resistance of concrete, improving the integrity of shotcrete, and reducing the risk of shotcrete.

قیمتهای ما بسته به میزان عرضه و سایر عوامل بازار ممکن است تغییر کند. پس از تماس شرکت شما برای اطلاعات بیشتر، لیست قیمت بهروز شده را برای شما ارسال خواهیم کرد.
بله، ما برای همه سفارشهای بینالمللی، حداقل تعداد سفارش را الزامی میدانیم. اگر به دنبال فروش مجدد هستید، اما در مقادیر بسیار کمتر، توصیه میکنیم وبسایت ما را بررسی کنید.
بله، ما میتوانیم اکثر اسناد از جمله گواهیهای آنالیز/انطباق؛ بیمه؛ مبدا و سایر اسناد صادراتی را در صورت لزوم ارائه دهیم.
برای نمونهها، زمان تحویل حدود ۷ روز است. برای تولید انبوه، زمان تحویل ۲۰ تا ۳۰ روز پس از دریافت پیشپرداخت است. زمانهای تحویل زمانی اعمال میشوند که (۱) پیشپرداخت شما را دریافت کرده باشیم و (۲) تأیید نهایی شما را برای محصولاتتان داشته باشیم. اگر زمانهای تحویل ما با مهلت شما مطابقت ندارد، لطفاً الزامات خود را با فروش خود مرور کنید. در همه موارد، ما سعی خواهیم کرد نیازهای شما را برآورده کنیم. در بیشتر موارد، ما قادر به انجام این کار هستیم.
شما میتوانید وجه را به حساب بانکی ما، وسترن یونیون یا پیپال واریز کنید:
30٪ پیش پرداخت، 70٪ مانده در مقابل نسخه B/L.
ما مواد و کیفیت کار خود را گارانتی میکنیم. تعهد ما رضایت شما از محصولاتمان است. چه گارانتی داشته باشید چه نداشته باشید، فرهنگ شرکت ما رسیدگی و حل تمام مشکلات مشتریان برای همه است.’رضایت
بله، ما همیشه از بستهبندی صادراتی با کیفیت بالا استفاده میکنیم. ما همچنین از بستهبندی تخصصی برای کالاهای خطرناک و از شرکتهای حمل و نقل معتبر برای اقلام حساس به دما استفاده میکنیم. بستهبندی تخصصی و الزامات بستهبندی غیر استاندارد ممکن است هزینه اضافی داشته باشد.
هزینه حمل و نقل بستگی به روشی دارد که شما برای دریافت کالا انتخاب میکنید. اکسپرس معمولاً سریعترین اما در عین حال گرانترین روش است. حمل و نقل دریایی بهترین راه حل برای مقادیر زیاد است. ما فقط در صورتی میتوانیم نرخ دقیق حمل و نقل را به شما ارائه دهیم که جزئیات مقدار، وزن و روش را بدانیم. لطفا برای اطلاعات بیشتر با ما تماس بگیرید.
galvanized reinforcing mesh
نرده فولادی گالوانیزه
steel wire mesh fence
کنترل کامل بر محصول، ما را قادر میسازد تا اطمینان حاصل کنیم که مشتریان بالاترین کیفیت قیمتها و خدمات را دریافت میکنند. ما به هر کاری که برای خدمت به مشتریان خود انجام میدهیم، افتخار میکنیم.
اگر به محصولات ما علاقهمند هستید، میتوانید اطلاعات خود را اینجا بگذارید و ما به زودی با شما تماس خواهیم گرفت.
