High-Quality Galvanized Durable and Sturdy Building Reinforcement Mesh

High-Quality Galvanized Durable and Sturdy Building Reinforcement Mesh

Reinforcing mesh, also called welded steel mesh, steel welded mesh, steel mesh and so on. It is a mesh in which longitudinal steel bars and transverse steel bars are arranged at a certain interval and are at right angles to each other, and all intersections are welded together.

High-Quality Galvanized Durable and Sturdy Building Reinforcement Mesh
Ominaisuus
 

1. Special, good earthquake resistance and crack resistance. The mesh structure formed by the longitudinal bars and transverse bars of the reinforcing mesh is firmly welded. The bonding and anchoring with the concrete is good, and the force is evenly transmitted and distributed.
2. The use of reinforcing mesh in construction can save the number of steel bars. According to actual engineering experience, the use of reinforcing mesh can save 30% of the steel bar consumption, and the mesh is uniform, the wire diameter is accurate, and the mesh is flat. After the reinforcing mesh arrives at the construction site, it can be used directly without processing or loss.
3. The use of reinforcing mesh can greatly speed up the construction progress and shorten the construction period. After the reinforcing mesh is laid according to the requirements, the concrete can be poured directly, eliminating the need for on-site cutting, placing, and binding one by one, which helps to save 50%-70% of the time.

reinforcing mesh (15)
sd
reinforcing mesh (16)
asd
Hakemus
 
1. Application of reinforcing mesh in highway cement concrete pavement engineering

The minimum diameter and maximum spacing of reinforcing mesh for reinforced concrete pavement shall comply with current industry standards. When cold-rolled ribbed steel bars are used, the steel bar diameter shall not be less than 8mm, the longitudinal steel bar spacing shall not be greater than 200mm, and the transverse steel bar spacing shall not be greater than 300mm. The vertical and horizontal steel bars of the welded mesh should have the same diameter, and the thickness of the protective layer of the steel bars should not be less than 50mm. The welded mesh for reinforced concrete pavement reinforcement can be implemented in accordance with the relevant regulations for welded mesh for reinforced concrete pavement.

2. Application of reinforcing mesh in bridge engineering

Mainly used in bridge deck pavement of municipal bridges and highway bridges, renovation of old bridge decks, anti-cracking of bridge piers, etc. The quality acceptance of thousands of bridge applications in China shows that the use of welded mesh can significantly improve the quality of the pavement layer of the bridge deck, the pass rate of the thickness of the protective layer is over 97%, the flatness of the bridge deck is improved, the bridge deck is almost free of cracks, and the pavement speed is increased More than 50%, reducing the cost of bridge deck pavement by about 10%.

3. Application of reinforcing mesh in tunnel lining

According to national regulations, the ribbed reinforcing mesh should be installed in shotcrete, which is conducive to improving the shear and bending strength of shotcrete, improving the punching resistance and bending resistance of concrete, improving the integrity of shotcrete, and reducing the risk of shotcrete.

reinforcing mesh
FAQ
 
Mitkä ovat hintanne?

Hintamme voivat muuttua tarjonnan ja muiden markkinatekijöiden mukaan. Lähetämme sinulle päivitetyn hinnaston, kun yrityksesi on ottanut meihin yhteyttä lisätietojen saamiseksi.

Onko teillä vähimmäistilausmäärää?

Kyllä, vaadimme kaikille kansainvälisille tilauksille jatkuvaa vähimmäistilausmäärää. Jos haluat myydä edelleen, mutta paljon pienempiä määriä, suosittelemme, että tutustut verkkosivustoomme.

Voitteko toimittaa asiaankuuluvat asiakirjat?

Kyllä, voimme toimittaa useimmat asiakirjat, mukaan lukien analyysi-/vaatimustenmukaisuustodistukset, vakuutuksen, alkuperätodistukset ja muut vientiasiakirjat tarvittaessa.

Mikä on keskimääräinen läpimenoaika?

Näytteiden toimitusaika on noin 7 päivää. Massatuotannon toimitusaika on 20–30 päivää ennakkomaksun vastaanottamisesta. Toimitusajat tulevat voimaan, kun (1) olemme vastaanottaneet ennakkomaksusi ja (2) olemme saaneet lopullisen hyväksyntäsi tuotteillesi. Jos toimitusaikamme eivät sovi määräaikaan, käykää vaatimuksenne läpi myyntinne yhteydessä. Pyrimme aina täyttämään tarpeesi. Useimmissa tapauksissa pystymme siihen.

Millaisia ​​maksutapoja hyväksytte?

Voit suorittaa maksun pankkitilillemme, Western Unionille tai PayPalille:

30 % ennakkomaksu, 70 % saldo B/L-kopiota vastaan.

Mikä on tuotteen takuu?

Takaamme materiaaleillemme ja työn laadullemme. Sitoumuksemme on, että olet tyytyväinen tuotteisiimme. Takuulla tai ilman, yrityksemme kulttuuriin kuuluu käsitellä ja ratkaista kaikki asiakkaiden ongelmat kaikkien kanssa.tyytyväisyys

Takaatteko tuotteiden turvallisen ja varman toimituksen?

Kyllä, käytämme aina korkealaatuisia vientipakkauksia. Käytämme myös vaarallisille aineille erikoispakkauksia ja lämpötilaherkille tuotteille validoituja kylmävarastointipalveluita. Erikoispakkauksista ja epästandardeista pakkausvaatimuksista voidaan periä lisämaksu.

Entä toimituskulut?

Toimituskulut riippuvat valitsemastasi toimitustavasta. Pikatoimitus on yleensä nopein, mutta myös kallein tapa. Merirahti on paras ratkaisu suurille määrille. Tarkat rahtihinnat voimme antaa vain, jos tiedämme tiedot määrästä, painosta ja toimitustavasta. Ota yhteyttä saadaksesi lisätietoja.

 

galvanized reinforcing mesh

galvanoitu teräsaita

steel wire mesh fence

pyydä tarjous

Täydellinen tuotteen hallinta antaa meille mahdollisuuden varmistaa, että asiakkaat saavat korkealaatuisimpia hintoja ja palveluita. Olemme ylpeitä kaikesta, mitä teemme asiakkaidemme palvelemiseksi.

steel fencing suppliers

Jos olet kiinnostunut tuotteistamme, voit halutessasi jättää tietosi tähän, niin otamme sinuun yhteyttä pian.