+8615930870079

한국인

집
제품
건설용 메시
강화 메쉬
교량 건설용 굵은 아연 도금 보강망

Bridge Construction Bold Galvanized Reinforcing Mesh

교량 건설용 굵은 아연 도금 보강망

간단한 설명:

There are also many specifications and models of steel mesh, 20×20 mm, slightly smaller 10×10 mm, some can reach 100×100 mm or 200×200 mm, and the larger one can reach 400×400 mm.

Welcome to contact us.

문의하기

철근 보강망 콘크리트 보강망 롤

제품 설명

Welded reinforcement steel mesh is a steel mesh welded by cold-rolled ribbed steel bars or cold-rolled smooth round steel bars. Welded steel mesh for reinforced concrete is a good and efficient material for concrete plates.
Its appearance is of great significance to improving building construction efficiency, structural quality, safety and reliability, and changing traditional building construction methods. It can be used for reinforcement of reinforced concrete structures and ordinary steel bars of prestressed concrete structures.
After the use of reinforced concrete columns, the bearing capacity, energy consumption and ductility coefficient of the wall have been improved, and it has the characteristics of earthquake resistance, crack resistance, and fall-off resistance.

특징

특징:
1. High strength: The reinforcement mesh is made of high-strength steel, which has high strength and durability.
2. Anti-corrosion: The surface of the steel mesh is treated with anti-corrosion, which can resist corrosion and oxidation.
3. Easy to process: The steel mesh can be cut and processed according to the needs, which is convenient to use.
4. Convenient construction: The reinforced mesh is light in weight, easy to carry and install, and can greatly shorten the construction time.
5. Economical and practical: the price of steel mesh is relatively low, economical and practical.

With these advantages and characteristics of steel mesh, if the steel mesh is laid on the wall of the building, the cracking of the wall will be reduced accordingly, and the seismic performance can also be enhanced, so the steel mesh is an indispensable building material in construction projects .

사양

The specifications and models of reinforcement mesh are divided into two types because of their different grades, diameters, spacing, and lengths, which are shaped steel bars and customized steel bars.

The following is the standard number of standard reinforcement mesh, which is a national standard and cannot be changed and produced at will.
Type D, Type E, Type B, Type C, Type A, and Type F have a total of 6 types, basically including all types of standard reinforcement mesh on the market.
The size of the mesh is also produced according to different models, and the regulation is between 100 mm and 200 mm. The specified range of steel wire diameter is also very standard, and the requirement is between 5-18 mm.

The mesh spacing of shaped steel mesh:
Type A: steel bar spacing 200mmX200mm
Type B: steel bar spacing 100mmX200mm
Type C: steel bar spacing 150mmx200mm
Type D: steel bar spacing 100mmX100mm
Type E: steel bar spacing 150mmx150mm
Type F: steel bar spacing 100mmx150mm

There is no very clear size requirement for customized reinforcement mesh. It is customized according to the construction scene and use requirements at that time. If you have customization needs, you are welcome to contact us.

애플리케이션

The use of reinforcement mesh can effectively improve the structural strength, save the use of steel, save labor, and the steel mesh is convenient for transportation, convenient construction, high grid layout accuracy, large-scale production, and high cost performance.
Reinforcing mesh can be widely used in highway construction, bridge construction, tunnel construction and other aspects of construction.