Mawonekedwe
| Blade spec | Mbiri ya Blade |
Blade makulidwe mm |
Kwambiri waya awiri mm |
Blade kutalika mm |
Blade m'lifupi mm |
Blade space mm |
| DJL-10 |  |
0.5±0.05 | 2.5±0.1 | 10±1 | 13 ±1 | 26 ±1 |
| DJL-12 |  |
0.5±0.05 | 2.5±0.1 | 12 ±1 | 15 ±1 | 26 ±1 |
| DJL-18 |  |
0.5±0.05 | 2.5±0.1 | 18 ±1 | 15 ±1 | 33 ±1 |
| DJL-22 |  |
0.5±0.05 | 2.5±0.1 | 22 ±1 | 15 ±1 | 34 ±1 |
| DJL-28 |  |
0.5±0.05 | 2.5 | 28 | 15 | 45 ±1 |
| DJL-30 |  |
0.5±0.05 | 2.5 | 30 | 18 | 45 ±1 |
| DJL-60 |  |
0.6±0.05 | 2.5±0.1 | 60±2 | 32 ±1 | 100±2 |
| DJL-65 |  |
0.6±0.05 | 2.5±0.1 | 65 ±2 | 21 ±1 | 100±2 |
| Zakuthupi | Chitsulo chosapanga dzimbiri (304, 304L, 316, 316L, 430), chitsulo cha carbon. |
| Chithandizo chapamwamba | Galvanized, PVC TACHIMATA (wobiriwira, lalanje, buluu, chikasu, etc.), E-zokutira (electrophoretic ❖ kuyanika), ❖ kuyanika ufa. |
| Makulidwe | Mbiri ya Razor wire cross section |
 |
|
| Waya awiri awiri: 2.5 mm (± 0.10 mm). | |
| Kuchuluka kwa tsamba: 0.5 mm (± 0.10 mm). | |
| Kuthamanga kwamphamvu: 1400-1600 MPa. | |
| Kupaka kwa zinc: 90 gsm - 275 gsm. | |
| Kutalika kwa coil: 300 mm - 1500 mm. | |
| Lupu pa koyilo: 30-80. | |
| Kutalika kotambasula: 4 m - 15 m. |
Kugwiritsa ntchito
Waya wa Razor amagwiritsidwa ntchito kwambiri, ndipo angagwiritsidwe ntchito kudzipatula ndi kuteteza malire a udzu, njanji, ndi misewu ikuluikulu, komanso chitetezo champanda wa zipinda zamaluwa, mabungwe aboma, ndende, malo akunja, ndi chitetezo chakumalire.
waya wopangira malata
galvanized razor wire fence
ukonde wachitsulo chosapanga dzimbiri
funsani mtengo
Kulamulira kwathunthu pa malonda kumatithandiza kuonetsetsa kuti Makasitomala amalandira mitengo ndi ntchito zapamwamba kwambiri. timanyadira zonse zomwe timachita potumikira makasitomala athu.
