Reinforcing mesh, also called welded steel mesh, steel welded mesh, steel mesh and so on. It is a mesh in which longitudinal steel bars and transverse steel bars are arranged at a certain interval and are at right angles to each other, and all intersections are welded together.
1. Special, good earthquake resistance and crack resistance. The mesh structure formed by the longitudinal bars and transverse bars of the reinforcing mesh is firmly welded. The bonding and anchoring with the concrete is good, and the force is evenly transmitted and distributed.
2. The use of reinforcing mesh in construction can save the number of steel bars. According to actual engineering experience, the use of reinforcing mesh can save 30% of the steel bar consumption, and the mesh is uniform, the wire diameter is accurate, and the mesh is flat. After the reinforcing mesh arrives at the construction site, it can be used directly without processing or loss.
3. The use of reinforcing mesh can greatly speed up the construction progress and shorten the construction period. After the reinforcing mesh is laid according to the requirements, the concrete can be poured directly, eliminating the need for on-site cutting, placing, and binding one by one, which helps to save 50%-70% of the time.




The minimum diameter and maximum spacing of reinforcing mesh for reinforced concrete pavement shall comply with current industry standards. When cold-rolled ribbed steel bars are used, the steel bar diameter shall not be less than 8mm, the longitudinal steel bar spacing shall not be greater than 200mm, and the transverse steel bar spacing shall not be greater than 300mm. The vertical and horizontal steel bars of the welded mesh should have the same diameter, and the thickness of the protective layer of the steel bars should not be less than 50mm. The welded mesh for reinforced concrete pavement reinforcement can be implemented in accordance with the relevant regulations for welded mesh for reinforced concrete pavement.
Mainly used in bridge deck pavement of municipal bridges and highway bridges, renovation of old bridge decks, anti-cracking of bridge piers, etc. The quality acceptance of thousands of bridge applications in China shows that the use of welded mesh can significantly improve the quality of the pavement layer of the bridge deck, the pass rate of the thickness of the protective layer is over 97%, the flatness of the bridge deck is improved, the bridge deck is almost free of cracks, and the pavement speed is increased More than 50%, reducing the cost of bridge deck pavement by about 10%.
According to national regulations, the ribbed reinforcing mesh should be installed in shotcrete, which is conducive to improving the shear and bending strength of shotcrete, improving the punching resistance and bending resistance of concrete, improving the integrity of shotcrete, and reducing the risk of shotcrete.

اسان جون قيمتون سپلاءِ ۽ ٻين مارڪيٽ عنصرن جي لحاظ کان تبديل ٿي سگهن ٿيون. وڌيڪ معلومات لاءِ توهان جي ڪمپني اسان سان رابطو ڪرڻ کان پوءِ اسان توهان کي هڪ تازه ڪاري قيمت جي فهرست موڪلينداسين.
ها، اسان کي سڀني بين الاقوامي آرڊرن جي ضرورت آهي ته گهٽ ۾ گهٽ آرڊر جي مقدار جاري هجي. جيڪڏهن توهان ٻيهر وڪڻڻ چاهيو ٿا پر تمام گهٽ مقدار ۾، اسان توهان کي صلاح ڏيون ٿا ته اسان جي ويب سائيٽ چيڪ ڪريو.
ها، اسان گھڻا دستاويز مهيا ڪري سگھون ٿا جن ۾ تجزيو / مطابقت جا سرٽيفڪيٽ؛ انشورنس؛ اصليت، ۽ ٻيا برآمد دستاويز شامل آهن جتي ضرورت هجي.
نمونن لاءِ، ليڊ ٽائيم تقريباً 7 ڏينهن آهي. وڏي پيماني تي پيداوار لاءِ، ليڊ ٽائيم جمع جي ادائيگي حاصل ڪرڻ کان پوءِ 20-30 ڏينهن آهي. ليڊ ٽائيم تڏهن اثرائتو ٿين ٿا جڏهن (1) اسان کي توهان جي جمع ملي وئي آهي، ۽ (2) اسان کي توهان جي شين لاءِ توهان جي آخري منظوري ملي وئي آهي. جيڪڏهن اسان جا ليڊ ٽائيم توهان جي آخري تاريخ سان ڪم نه ٿا ڪن، ته مهرباني ڪري پنهنجي وڪري سان پنهنجي گهرجن تي غور ڪريو. سڀني حالتن ۾ اسان توهان جي ضرورتن کي پورو ڪرڻ جي ڪوشش ڪنداسين. گهڻن ڪيسن ۾ اسان اهو ڪرڻ جي قابل آهيون.
توهان اسان جي بئنڪ اڪائونٽ، ويسٽرن يونين يا پي پال ۾ ادائيگي ڪري سگهو ٿا:
30٪ اڳواٽ جمع، 70٪ بيلنس B/L جي ڪاپي جي خلاف.
اسين پنهنجي مواد ۽ ڪاريگري جي وارنٽي ڏيون ٿا. اسان جو عزم اسان جي شين سان توهان جي اطمينان لاءِ آهي. وارنٽي هجي يا نه، اهو اسان جي ڪمپني جو ڪلچر آهي ته سڀني گراهڪن جي مسئلن کي حل ڪيو وڃي ۽ هر ڪنهن کي حل ڪيو وڃي.’جي اطمينان
ها، اسان هميشه اعليٰ معيار جي برآمدي پيڪنگنگ استعمال ڪندا آهيون. اسان خطرناڪ شين لاءِ خاص خطري واري پيڪنگ ۽ گرمي پد جي حساس شين لاءِ تصديق ٿيل ڪولڊ اسٽوريج شپپر پڻ استعمال ڪندا آهيون. ماهر پيڪنگ ۽ غير معياري پيڪنگ جي گهرجن تي اضافي چارج ٿي سگهي ٿو.
شپنگ جي قيمت ان طريقي تي منحصر آهي جيڪو توهان سامان حاصل ڪرڻ لاءِ چونڊيو ٿا. ايڪسپريس عام طور تي سڀ کان تيز ترين پر تمام مهانگو طريقو آهي. سمنڊ جي مال برداري ذريعي وڏي مقدار لاءِ بهترين حل آهي. صحيح مال برداري جي شرح اسان توهان کي صرف تڏهن ڏئي سگهون ٿا جڏهن اسان کي رقم، وزن ۽ طريقي جي تفصيل جي خبر هجي. وڌيڪ معلومات لاءِ مهرباني ڪري اسان سان رابطو ڪريو.
galvanized reinforcing mesh
لوهي اسٽيل جي باڙ
steel wire mesh fence
پراڊڪٽ تي مڪمل ڪنٽرول اسان کي گراهڪن کي اعليٰ معيار جون قيمتون ۽ خدمتون حاصل ڪرڻ جي قابل بڻائي ٿو. اسان پنهنجي گراهڪن جي خدمت لاءِ جيڪو ڪجهه ڪريون ٿا ان تي فخر ڪريون ٿا.
جيڪڏهن توهان اسان جي شين ۾ دلچسپي رکو ٿا، ته توهان پنهنجي معلومات هتي ڇڏڻ جو انتخاب ڪري سگهو ٿا، ۽ اسان جلد ئي توهان سان رابطو ڪنداسين.
