Razor barbed wire inogadzirwa nekudzivirira ngura mushure mekunge tambo ine minzwa yakaita sebadza yagadzirwa. Iyo minzwa yakapinza yakaita sebanga inogadzirwa kuita accordion shape newaya mbiri. Pamusana pekupenya kwakakosha kwesimbi, chigadzirwa chacho chakanaka uye chinotyisa. Chigadzirwa chacho pachacho chakapinza uye chakaoma kubata, chinogona kutamba chimwe chinodzivisa.
Irwo rudzi rutsva rwechigadzirwa chekudzivirira chakagadzirwa mumakore achangopfuura, nekuti ine simba rekudzivirira rekuzviparadzanisa nevamwe uye nekuvakwa kuri nyore. Inowanzoshandiswa munzvimbo dzinoda kuchengetedzwa kwepamusoro, se: maindasitiri emunyika maindasitiri nemigodhi, dzimba dzemagadheni, nzvimbo dzemuganho, nhandare dzemauto, majeri, nzvimbo dzekuvharirwa, zvivakwa zvehurumende uye zvimwe zvivakwa zvekuchengetedza nyika.
| Material | Stainless simbi (304, 304L, 316, 316L, 430), carbon simbi. |
| Kurapa kwepamusoro | Galvanized, PVC coated (girinhi, orenji, bhuruu, yero, etc.), E-kupfeka (electrophoretic coating), upfu unhani. |
| Dimensions | Razor wire cross section profile |
 |
|
| Yakajairika waya dhayamita: 2.5 mm (± 0.10 mm). | |
| Ukobvu hweblade: 0.5 mm (± 0.10 mm). | |
| Kusimba kwesimba: 1400-1600 MPa. | |
| Zinc kupfeka: 90 gsm - 275 gsm. | |
| Coil dhayamita renji: 300 mm - 1500 mm. | |
| Loops pacoil: 30-80. | |
| Kureba kureba: 4 m - 15 m. |
| Blade spec | Blade profile |
Blade ukobvu mm |
Core waya dhayamita mm |
Blade urefu mm |
Blade width mm |
Blade nzvimbo mm |
| DJL-10 |  |
0.5±0.05 | 2.5±0.1 | 10±1 | 13±1 | 26±1 |
| DJL-12 |  |
0.5±0.05 | 2.5±0.1 | 12±1 | 15±1 | 26±1 |
| DJL-18 |  |
0.5±0.05 | 2.5±0.1 | 18±1 | 15±1 | 33±1 |
| DJL-22 |  |
0.5±0.05 | 2.5±0.1 | 22±1 | 15±1 | 34±1 |
| DJL-28 |  |
0.5±0.05 | 2.5 | 28 | 15 | 45±1 |
| DJL-30 |  |
0.5±0.05 | 2.5 | 30 | 18 | 45±1 |
| DJL-60 |  |
0.6±0.05 | 2.5±0.1 | 60±2 | 32±1 | 100±2 |
| DJL-65 |  |
0.6±0.05 | 2.5±0.1 | 65±2 | 21±1 | 100±2 |
Razor wire inoshandiswa zvakanyanya, uye inogona kushandiswa kuparadzaniswa uye kudzivirira miganhu yehuswa, njanji, uye migwagwa mikuru, pamwe nekuchengetedzwa kwakavharirwa kwedzimba dzegadheni, masangano ehurumende, majeri, nzvimbo dzekunze, uye miganhu yedziviriro.
waya ine minzwa
tenga waya ine minzwa
ss waya ine minzwa
Kudzora kwakazara pamusoro pechigadzirwa kunoita kuti tive nechokwadi chekuti Vatengi vanowana mitengo yemhando yepamusoro uye masevhisi. isu Tinodada mune zvese zvatinoita kushandira vatengi vedu.
