Mohala o nang le lehare o entsoe ka ts'ireletso ea mafome ka mor'a hore thapo e nang le sebōpeho sa lehare e etsoe. Meutloa e bohale e bōpehileng joaloka thipa e entsoe ka sebōpeho sa accordion ka lithapo tse peli. Ka lebaka la khanya e khethehileng ea tšepe, sehlahisoa se setle ebile se tšosa. Sehlahisoa ka boeona se bohale ebile se thata ho ama, se ka bapalang phello e itseng e thibelang.
Ke mofuta o mocha oa sehlahisoa sa ts'ireletso se ntlafalitsoeng lilemong tsa morao tjena, hobane se na le bokhoni bo matla ba ho itšehla thajana le kaho e bonolo. Hangata e sebelisoa libakeng tse hlokang tšireletso e phahameng ea tšireletso, tse kang: likhoebo tsa naha tsa indasteri le tsa merafo, lifolete tsa lirapa, libaka tsa moeli, masimo a sesole, lichankana, litsi tsa litlamo, mehaho ea 'muso le lisebelisoa tse ling tsa tšireletso ea naha.
| Lintho tse bonahalang | Tšepe e sa hloekang (304, 304L, 316, 316L, 430), tšepe ea carbon. |
| Phekolo ea bokaholimo | Galvanized, PVC coated (tala, lamunu, putsoa, mosehla, joalo-joalo), E-coating (electrophoretic barbotage), phofo barbotage. |
| Litekanyo | Razor wire cross section profile |
 |
|
| Bophara ba terata e tloaelehileng: 2.5 mm (± 0.10 mm). | |
| Botenya ba lehare le tloaelehileng: 0.5 mm (± 0.10 mm). | |
| Matla a matla: 1400-1600 MPa. | |
| Ho roala zinki: 90 gsm - 275 gsm. | |
| Sebaka sa bophara ba coil: 300 mm - 1500 mm. | |
| Loops ka khoele: 30-80. | |
| Bolelele ba ho otlolla: 4 m - 15 m. |
| Setšoantšo sa Blade | Boemo ba Blade |
Lehare botenya mm |
Ea mantlha terata bophara mm |
Lehare bolelele mm |
Lehare bophara mm |
Sebaka sa lehare mm |
| DJL-10 |  |
0.5±0.05 | 2.5±0.1 | 10±1 | 13±1 | 26±1 |
| DJL-12 |  |
0.5±0.05 | 2.5±0.1 | 12±1 | 15±1 | 26±1 |
| DJL-18 |  |
0.5±0.05 | 2.5±0.1 | 18±1 | 15±1 | 33±1 |
| DJL-22 |  |
0.5±0.05 | 2.5±0.1 | 22±1 | 15±1 | 34±1 |
| DJL-28 |  |
0.5±0.05 | 2.5 | 28 | 15 | 45±1 |
| DJL-30 |  |
0.5±0.05 | 2.5 | 30 | 18 | 45±1 |
| DJL-60 |  |
0.6±0.05 | 2.5±0.1 | 60±2 | 32±1 | 100±2 |
| DJL-65 |  |
0.6±0.05 | 2.5±0.1 | 65±2 | 21±1 | 100±2 |
Razor terata e sebelisoa haholo, 'me e ka sebelisoa bakeng sa ho arola le ho sireletsa meeli ea makhulo a joang, literene le litsela tse kholo, hammoho le tšireletso ea kampeng bakeng sa lifolete tsa lirapa, mekhatlo ea 'muso, lichankana, libaka tse ka ntle le libaka tsa tšireletso tse moeling.
terata e metsu
galvanized mesh
lehare le terata
Taolo e felletseng holim'a sehlahisoa e re nolofalletsa ho netefatsa hore Bareki ba fumana litheko le litšebeletso tsa boleng bo holimo. re motlotlo ka tsohle tseo re li etsang ho sebeletsa bareki ba rona.
