The protective net to prevent parabolic objects on the bridge is called bridge anti-throwing net. Because it is often used on viaducts, it is also called viaduct anti-throwing net. Its main function is to install it on municipal viaducts, highway overpasses, railway overpasses, overpasses, etc., to prevent parabolic injuries. This method can ensure that pedestrians and vehicles passing under the bridge will not be injured. In such a Under such circumstances, the application of bridge anti-throwing nets is also increasing.
Because its function is protection, the anti-throwing net of the bridge is required to have high strength, strong anti-corrosion and anti-rust capabilities. Usually, the height of the anti-throwing net of the bridge is between 1.2-2.5 meters, with rich colors and beautiful appearance. Beautify the urban environment.
The bridge anti-throwing mesh uses high-quality steel plates and angle steels as raw materials. It is a welded mesh protected by three layers of galvanizing, pre-coating primer and high-adhesion powder spraying. It has the characteristics of anti-corrosion and anti-ultraviolet for a long time.
The surface treatment of the anti-throwing net is galvanized and spray-coated, or one of them can be selected, and the top end is covered with a plastic cover or a rainproof cap.
Depending on the environment and installation methods, methods such as embedding 50cm in advance and adding a base can be used. The bridge anti-throwing mesh and the column are connected by screws and various special plastic or iron clips.
The bridge anti-throwing net has a wide range of uses and can be used as a highway isolation fence. It mainly uses high-quality wire rod as the material, and the mesh surface is galvanized and pvc-coated, which has the characteristics of anti-corrosion and anti-ultraviolet for a long time.
| Produktnavn | Expanded metal mesh fence panels |
| Materiale | Galvanized, stainless steel, low carbon steel, aluminum or customized |
| Overflatebehandling | Hot-dipped galvanized and electric galvanized, or others. |
| Hole Patterns | Diamond, hexagon, sector, scale or others. |
| Hole Size(mm) | 3X4, 4×6, 6X12, 5×10, 8×16, 7×12, 10X17, 10×20, 15×30, 17×35 or customized |
| Tykkelse | 0.2-1.6 mm or customized |
| Roll / Sheet Height | 250, 450, 600, 730, 100 mm or customized by clients |
| Roll / Sheet Length | Customized. |
| Applications | Curtain wall, precision filter mesh, chemical network, indoor furniture design, barbecue mesh, aluminum doors, aluminum door and window mesh, and applications such as outdoor guardrails, steps. |
| Pakkingsmetoder | 1. I tre-/stålpaller 2. Andre spesialmetoder i henhold til kundens krav |
| Production Period | 15 days for 1X20ft container, 20days for 1X40HQ container. |
| Quality Control | ISO Certification; SGS Certification |
| Ettersalgsservice | Produkttestrapport, oppfølging på nett. |
Expanded metal fence is economical, cost-effective, good strength and long service time, so it is widely used in highway anti-glare net, urban roads, military camps, national defense borders, parks, mansions and villas, residential quarters, stadiums, airports, road greening Belts etc. as isolation fences, guardrails, etc.
The plastic-coated thickness of the bridge anti-throwing net can reach more than 1.0mm. The mesh surface has strong impact resistance. There are generally two types of mesh edges: crooked and twisted. Used for roads, railways, expressways, etc., it can be made into a network wall or used as a temporary isolation network, and it can be realized only by using different column fixing methods.
Prisene våre kan endres avhengig av tilbud og andre markedsfaktorer. Vi sender deg en oppdatert prisliste etter at bedriften din har kontaktet oss for ytterligere informasjon.
Ja, vi krever at alle internasjonale bestillinger har et løpende minimumsbestillingsantall. Hvis du ønsker å videreselge, men i mye mindre mengder, anbefaler vi at du sjekker ut nettsiden vår.
Ja, vi kan tilby det meste av dokumentasjonen, inkludert analyse-/samsvarssertifikater, forsikring, opprinnelsesdokumenter og andre eksportdokumenter der det er nødvendig.
For vareprøver er leveringstiden omtrent 7 dager. For masseproduksjon er leveringstiden 20–30 dager etter at vi har mottatt depositumet. Leveringstidene trer i kraft når (1) vi har mottatt depositumet ditt, og (2) vi har din endelige godkjenning av produktene dine. Hvis leveringstidene våre ikke er innenfor fristen din, vennligst gjennomgå kravene dine med salget. I alle tilfeller vil vi prøve å imøtekomme dine behov. I de fleste tilfeller er vi i stand til å gjøre det.
Du kan betale til bankkontoen vår, Western Union eller PayPal:
30% depositum på forhånd, 70% saldo mot kopi av B/L.
Vi garanterer våre materialer og utførelse. Vår forpliktelse er at du skal være fornøyd med produktene våre. Enten det er garanti eller ikke, er det vår kultur å ta opp og løse alle kundeproblemer for alle.’tilfredshet
Ja, vi bruker alltid eksportemballasje av høy kvalitet. Vi bruker også spesialisert fareemballasje for farlig gods og validerte kjølelagertransportører for temperaturfølsomme varer. Spesialemballasje og ikke-standardiserte pakkekrav kan medføre et tillegg i prisen.
Fraktkostnaden avhenger av hvilken måte du velger å få varene på. Ekspressfrakt er vanligvis den raskeste, men også den dyreste måten. Sjøfrakt er den beste løsningen for store mengder. Vi kan bare gi deg nøyaktige fraktpriser hvis vi kjenner detaljene om mengde, vekt og leveringsmåte. Ta kontakt med oss for mer informasjon.
3d fence
fence 3d
galvanized anti climb fence
Full kontroll over produktet gjør det mulig for oss å sikre at kundene får priser og tjenester av høyeste kvalitet. Vi er stolte av alt vi gjør for å betjene kundene våre.
