The bridge anti-throw net uses high-quality steel plates and angle steel as raw materials. It is a welded mesh protected by three layers of galvanizing, pre-priming and high-adhesion powder spraying. It has the characteristics of long-term corrosion resistance and UV resistance.
The surface treatment of the bridge anti-throw net is galvanized and spray-coated, or you can choose either one, and the top end is covered with a plastic cover or a rainproof cap.
Depending on the environment and installation methods, methods such as burying 50cm in advance and adding a base can be used. Bridge anti-throw net mesh and columns are connected by screws and various special plastic or iron clips.
Bridge anti-throw nets are widely used and can be used as highway isolation fences. It mainly uses high-quality wire rod as the material. It is galvanized and PVC-coated mesh, which has the characteristics of long-term corrosion resistance and UV resistance.
The thickness of the bridge anti-throw net can reach more than 1.0mm. The mesh surface has strong impact resistance. There are generally two types of mesh edges: hooked edges and twisted edges. Used for roads, railways, expressways, etc., it can be made into a network wall or used as a temporary isolation network by using different column fixing methods.
After the bridge anti-throw net is produced, all parts must undergo rust removal, grinding, passivation, vulcanization and other processes before being plastic-plated. The color is usually fruit green, the thickness of the coating is 0.5~0.6mm, and the plating powder is made of anti-thrust. Imported weather-resistant resin powder with better aging performance. If you choose us, you don’t have to worry about the quality of the product. Our products are sold all over the world and have been used and installed on highways in many countries, which ensures product quality. and service.
Want to know more? Come and contact us!
