How to ensure that traffic guardrails can play an important role at critical times? Not only must quality be ensured during product production, but it is also an important part in subsequent installation and use. If the installation is not in place, it will inevitably affect the performance of the traffic guardrails. , how to correctly install traffic guardrails and what precautions should be taken.
Traffic guardrail installation method:
1. The traffic guardrail series assembly is carried out in accordance with the order requirements before leaving the factory. Once the product arrives at the construction site, each column simply needs to be partially inserted into the stable base and expanded according to department requirements.
2. After completing the basic design, use special bolts to correctly connect each part of the traffic guardrail.
3. In order to improve the wind resistance and resistance to vicious movements of the traffic guardrail, internal expansion bolts must be used to fix the stable base and floor to the ground.
4. Connect the user and install the reflector on the top of the traffic guardrail.
5. The movable cast iron seat can be symmetrically locked with spikes or expansion screws.
Things to note when installing traffic guardrails:
1. Prepare all tools and accessories, taking two columns as an example. Prepare 4 nails, 8 small drill bit tails, 8 large drill bit tails, 8 small buckles, 4 reflective blocks, a hammer and an electric drill.
2. First, install the bottom spring with the tip, and then insert the post into the spring of the bottom spring until the post is inserted into the bottom of the spring.
3. Insert the upper and lower beams of the traffic guardrail piece into the upper and lower connectors of the columns, and then install the bottom pier and the column at the other end of the component so that they are in a straight line and then place the road spikes.
4. Use an electric drill to drive the long-tail cable into the corresponding instrument in the base to better connect the column to the base.
5. Use an electric drill to install the short tail cable on the side of the column and adjust the small buckle. Handrails on the road were installed.
The above are the correct installation methods of traffic guardrails and some matters that need to be paid attention to during the installation process. Installation is a very important process, and it is also an important task to ensure that the traffic guardrails can play their role in the later period, so this work must be completed perfectly.
